Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Mercedes CL - Videoguide

Mercedes CL (2006-2013 / C216, MK 3)
How do you remove the rear seats of the Mercedes CL?
In order to remove the rear seats of the Mercedes CL, you need to use a tool to pry off the covering located at the front of the seat: once this covering is …read all…
Posted on 3 May 2024 by ScegliAuto
Mercedes CL (2006-2013 / C216, MK 3)
How do you replace the panoramic roof of the Mercedes CL?
In order to replace the panoramic roof of the Mercedes CL, you need to fully open it so that you can locate the seal and mechanism that are positioned on the …read all…
Posted on 15 January 2024 by ScegliAuto
Mercedes CL (2006-2013 / C216, MK 3)
How to reset the service on the Mercedes CL-Class.
Once all the maintenance operations specified in the Mercedes CL service manual have been carried out, it is necessary to reset the control system that …read all…
Posted on 3 October 2023 by ScegliAuto
Mercedes CL (2006-2013 / C216, MK 3)
Where are the fuses located in the Mercedes CL?
The fuses of the Mercedes CL are contained within the appropriate fuse boxes that are installed on the vehicle: in this type of car, it is possible to find …read all…
Posted on 5 September 2023 by ScegliAuto
Mercedes CL (2006-2013 / C216, MK 3)
How to replace the key battery of the Mercedes CL C216
If you want to find out what is the procedure required to correctly replace the button cell battery in the key of your Mercedes CL C216 (year 2006-2013) you …read all…
Posted on 2 June 2023 by ScegliAuto
Mercedes CL (2006-2013 / C216, MK 3)
How to remove the display / navigator on the Mercedes CL
In this video tutorial we will see how to disassemble the display or navigator on the Mercedes CL W216 (CL550), following the instructions below. First we get …read all…
Posted on 3 May 2024 by ScegliAuto
Car stereo (1) Key (1) Checks and maintenance (2) Fuse box (1) Seat (1)

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos