Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the External Mirror Glass of a Mercedes GLA

Model: Mercedes Gla W156, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

To change the mirror on your Mercedes GLA, first remove the mirror by disconnecting the connectors. Now, remove the internal mechanism, secured to the mirror body with very small screws located at the corners of the mechanism itself.

This is a delicate job. Take out the mechanism; at this point, you can remove the outer frame of the mirror, which will also bring the damaged glass with it. You can purchase just the shell from one of the major e-commerce platforms for around £13. However, you will need to have it painted to match the colour of your car. The video shows how to repair it, but it certainly depends on the type of damage to your mirror: it was not broken, just cracked, so it could be fixed.

Now reposition the mirror in its place, fitting it into its housing, and refit the mechanism, tightening the tiny screws that held it in place.

Reconnect the mirror connectors and snap it back into place. Test the electric orientation of the mirrors.

The job is complete.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

Mercedes Gla (2013-2019 / W156, MK 1) In this video, see how to remove the rear lights of the Mercedes GLA Class: first, you need to remove the glove compartment near the light you want t…
Mercedes Gla (2020-2026 / MK 2, H247) To remove the door handle on a new generation Mercedes GLA, open the door and locate the small plastic cap on the side edge, corresponding to the out…
Mercedes Gla (2013-2019 / W156, MK 1) In this guide, discover how to disassemble and replace the battery of the key fob for the Mercedes GLA. First, take your key fob and start removing t…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos