Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door handle on a Mercedes GLA

Model: Mercedes Gla MK 2, H247 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Handle

See other generations:
Video tutorial

To remove the door handle on a new generation Mercedes GLA, open the door and locate the small plastic cap on the side edge, corresponding to the outer handle. Remove the cap to access the internal fastening screw.

Loosen the screw with the appropriate tool without completely removing it, then slide off the rear cover of the handle. At this point, move the handle outward and pull it out of its housing.

Disconnect any cable or electrical connector present at the back. The handle is now completely removed from the door.


Posted on 11 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Brake Pads on a Mercedes GLA
How to Remove the Front Brake Pads on a Mercedes GLA
Mercedes Gla (2013-2019 / W156, MK 1) Before you can start, lift the front of your Mercedes GLA. Begin by removing the left front wheel by unscrewing the fixing bolts. Next, unscrew and r…
How to Dismantle the Rear Lights on the Mercedes GLA?
How to Dismantle the Rear Lights on the Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) In this tutorial, see how to dismantle the rear lights on the Mercedes GLA, a very simple and quick operation. First, ensure the key is not inserted …
How to Remove the Air Vents in the Mercedes GLA?
How to Remove the Air Vents in the Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) In this tutorial, you will see how to remove the air vents in the Mercedes GLA, a task that is extremely simple and quick. You will need two flat-hea…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos