Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling the Glove Box Lock

Model: Mercedes Sl MK 5, R129 - Years 1989-2001
Part: Dashboard

To disassemble the glove box lock, first ensure you have the keys: only with the original key can you align the tabs that create the lock combination for removal. Start by removing the air vents located in the center of the console to free the lock support. Then, insert the key and turn the lock so that the side hole on the lock collar aligns with the channel underneath, where you will insert a small tool to retract the retaining bar and allow for the lock's extraction.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Disassembling the Convertible Top Lock
Instructions for Disassembling the Convertible Top Lock
Mercedes Sl (1989-2001 / MK 5, R129) The convertible top lock is always managed by the hydraulic system, which secures the closure once the top is lowered; to disassemble the lock, start…
How to Open the Trunk Lid of the Mercedes SL 500 MK5
How to Open the Trunk Lid of the Mercedes SL 500 MK5
Mercedes Sl (1989-2001 / MK 5, R129) This short video shows the procedure to open the rear trunk lid, even in case of a lock malfunction, of the Mercedes SL 500 fifth generation. To open…
How to Remove the Door Panel of the Mercedes Benz SL500
How to Remove the Door Panel of the Mercedes Benz SL500
Mercedes Sl (2001-2011 / R230) This guide shows how to disassemble the door panel of the 2002 Mercedes Benz SL500. First, remove the four screws on the side of the door: three from…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos