Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Trunk Lid of the Mercedes SL 500 MK5

Model: Mercedes Sl MK 5, R129 - Years 1989-2001

This short video shows the procedure to open the rear trunk lid, even in case of a lock malfunction, of the Mercedes SL 500 fifth generation. To open the trunk lid, insert the key and then press the handle to lift it; let's look at the emergency procedure if there are issues with the lock. Use a thin lever to remove the center brake light; use a flathead screwdriver to disengage the lock mechanism, allowing you to open it and access the trunk, as shown in the video!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located on the 1998 Mercedes SL 500?
Where is the fuse box located on the 1998 Mercedes SL 500?
Mercedes Sl (1989-2001 / MK 5, R129) The 1998 Mercedes SL 500 has a fuse box that contains the fuses for the operation of the vehicle's electronic components. The fuse box is located und…
How to Close or Open the Convertible Top on a Mercedes SL 560
How to Close or Open the Convertible Top on a Mercedes SL 560
Mercedes Sl (1989-2001 / MK 5, R129) In this video, see how to close or open the convertible top on a Mercedes SL 560, first series, by following the instructions below. First, remove th…
How to Remove the Mercedes SL Convertible Top?
How to Remove the Mercedes SL Convertible Top?
Mercedes Sl (2011-2021 / MK 7, R231) To remove the convertible top from the Mercedes SL, lift the top and open the trunk to access the cargo area. Here, you will need to remove the bolts…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos