Do it yourself
Frequently asked questions about cars and motorcycles

Where is the fuse box located on the 1998 Mercedes SL 500?

Model: Mercedes Sl MK 5, R129 - Years 1989-2001
Part: Fuse box

The 1998 Mercedes SL 500 has a fuse box that contains the fuses for the operation of the vehicle's electronic components. The fuse box is located under the hood, specifically on the right side next to the battery. To access the fuse box and replace a fuse, remove the cover by pressing on the sides. On the back of the cover, there is a label that shows the location and amperage of each fuse, which helps during replacement. It is very important to replace each fuse with one of the same amperage to avoid short circuits in the control unit. The fuses inside the box are categorized as: small, medium, and relay, which are the high amperage fuses, such as those for the starter motor and the battery.

Posted on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Sl (1989-2001 / MK 5, R129) This short video shows the procedure to open the rear trunk lid, even in case of a lock malfunction, of the Mercedes SL 500 fifth generation. To open…
Mercedes Sl (2001-2011 / R230) Following these brief and simple steps, we will see how to disassemble and replace the windshield washer pump fuse of the Mercedes SL 5.0 V8. First, …
Mercedes Sl (2011-2021 / MK 7, R231) The fuses on the Mercedes SL are located inside the designated fuse boxes present in the vehicle: this type of car has two fuse boxes. The first, the…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos