Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the ECU in the Mercedes Sprinter W906?

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Control unit

See other generations:
Video tutorial

In this video, you will see where the engine control unit (ECU) is located in the Mercedes Sprinter W906. For left-hand drive models, the ECU is located in the engine compartment, in front of the driver. In the OM651 engines, it is mounted high on the rear wall of the engine compartment and is clearly visible, as shown in the video.

It is positioned next to the coolant expansion tank and may be partially covered by a plastic cover that can be removed by hand. The unit is made of aluminium, with cooling fins and a large lever connector that is removed by pulling the lever upwards.

The 6-cylinder version has a specific configuration, and the ECU is lower down, still on the left side, behind the expansion tank.


Posted on 26 August 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port on the Mercedes Sprinter 2018
Where to Find the OBD Port on the Mercedes Sprinter 2018
Mercedes Sprinter (2006-2018 / MK 2, W906) Thanks to the instructions in the following guide dedicated to all of you who own a 2018 Mercedes Sprinter, you will finally be able to locate the OB…
How to Change the Remote Battery on the Mercedes Sprinter W906
How to Change the Remote Battery on the Mercedes Sprinter W906
Mercedes Sprinter (2006-2018 / MK 2, W906) If the remote for your Mercedes Sprinter W906 has suddenly stopped working and you want to find out the steps to complete the battery replacement, th…
Adjusting the Sliding Door on the Mercedes Sprinter W906
Mercedes Sprinter (2006-2018 / MK 2, W906) This video shows how to adjust and repair the sliding door of a Mercedes Sprinter W906. The door must be adjusted to slide along the bodywork without…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos