Do it yourself
Frequently asked questions about cars and motorcycles

Adjusting the Sliding Door on the Mercedes Sprinter W906

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Car door

This video shows how to adjust and repair the sliding door of a Mercedes Sprinter W906. The door must be adjusted to slide along the bodywork without causing damage, especially to the paint. First, remove the guide wedges, and tighten the guide stop at the top and bottom. There are three steps, clearly described in the video, to set the height, gap size, and installation depth. This will be done using a heel template and a feeler gauge. Finally, transfer the settings to the sliding door and set the stops.

Updated on 8 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Mercedes Sprinter (2006-2018 / MK 2, W906) The instructions in this guide will show you how to adjust the front door of the Mercedes Sprinter. First, open the front door of the vehicle and sta…
Mercedes Sprinter (2006-2018 / MK 2, W906) In order to remove the front headlight of the Mercedes Sprinter, you need to open the hood so that you can loosen the screws that secure the grille; …
Mercedes Sprinter (2006-2018 / MK 2, W906) To remove the EGR valve from the Mercedes Sprinter, open the bonnet to access the components located inside the engine compartment: here you will fin…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos