Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on a Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

See other generations:
Video tutorial

In this video tutorial, you will find the main instructions to remove and replace the headlight bulb on a Mercedes E-Class. First, open the hood of the vehicle and start by removing the plastic protective cover for the bulbs, disconnecting the electrical connector to remove the xenon bulb along with the control unit, as shown in the video.

At this point, install the new original bulb in the headlight assembly, connect the electrical wiring, and check the light operation; then, simply reassemble everything.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Mercedes E-Class
How to Replace the Headlight Bulb on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Replacing the headlight bulb on a Mercedes E-Class is a simple and quick task you can do yourself. To.. …
Replacing Front Headlight Bulb on Mercedes E-Class W211
Replacing Front Headlight Bulb on Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. original front headlight bulb on a Mercedes E-Class W211 by following these simple steps. First, open the hood of the vehicle and remove the plastic.. …
How to Replace the Headlight Bulb of the Mercedes E-Class?
How to Replace the Headlight Bulb of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the headlight bulb of the Mercedes E-Class, lift the vehicle so that the wheel on the side of the bulb to be replaced is off the ground: therefore,.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos