Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the Mercedes E-Class

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Headlight

In this guide, follow the step-by-step instructions to disassemble and replace the front headlight of the Mercedes E-Class. First, open the hood of the vehicle and start by removing the plastic cover located under the headlight; then, unscrew the mounting screws located above and below the headlight, disconnecting the bulb connector to remove it, as shown in the video. At this point, replace the bulbs or the entire headlight assembly, securing it properly to the body; check the proper operation of the lights!

Posted on 3 October 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Mercedes E-Class
How to replace the headlight bulb of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. on the right front headlight of a Mercedes E-Class model W 211. To replace the bulb, we need to open the front hood and then disconnect the connector.. …
How to Replace the Headlight Bulbs on a Mercedes E-Class
How to Replace the Headlight Bulbs on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. to replace the headlight bulbs on a Mercedes E-Class: open the hood by pulling the lever located at the bottom right of the dashboard and secure it.. …
Replacing Front Headlight Bulb on Mercedes E-Class W211
Replacing Front Headlight Bulb on Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. original front headlight bulb on a Mercedes E-Class W211 by following these simple steps. First, open the hood of the vehicle and remove the plastic.. …

Other guides you may be interested in

How to Reset the EDC Light on an Iveco Eurocargo

The engine light on an industrial vehicle like the Iveco Eurocargo must not be ignored. An engine fault on a heavy vehicle can cause serious damage to itself and others. After servicing, you can reset the EDC light, which is equivalent to an engine light, using the following method. Get into the vehicle, close the doors, and turn on the ignition: press the "call" button on the right side of the steering wheel once, then press the "down" button on the left side of the steering wheel twice. Now press the "menu" button on the right side of the steering wheel (below the phone button) and the "plus" button on the left side of the steering wheel. Now press "Ok" (still on the "call" button) and the light will turn off. Turn off the ignition and turn it back on to verify.

Watch the video!


by ScegliAuto

More videos