Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Filter in a Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the cabin filter in a Mercedes C-Class by following a few simple steps: the first thing to do is purchase a new cabin filter from an authorized auto parts dealer; next, get inside the vehicle, turn off the car, and pull the handbrake.

You can find the cabin filter under the glove compartment, so pull the passenger seat all the way back to have more space to work; remove the three Torx screws that secure the panel under the compartment.

Once the screws are removed and the panel is lowered, disconnect the interior lighting cable. Remove the panel and then take off the filter door and pull the filter from its housing.

Position the new cabin filter according to the arrows on the filter itself.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. Replacing the air filter on a Mercedes C-Class? Here’s how to do it. The cabin air filter is located at the bottom right of the glove compartment. G.. …
Mercedes Classe C (1993-2000 / W202) .. replace the cabin air filter on the Mercedes C-Class. First, get in the vehicle on the passenger side and start by removing the rectangular plastic.. …
Mercedes Classe C (2014-2021 / W205) .. to remove the cabin air filter from a Mercedes C-Class. Pull down on the lower fabric cover of the cabin with your hands, and use a screwdriver to remove.. …

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos