Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Replacing the cabin filter on Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Cabin air filter
Operation: Replacing the cabin filter on Mercedes C-Class

Replacing the air filter on a Mercedes C-Class? Let's see how it changes. The cabin filter is found at the bottom right of the glovebox. Let's get a screwdriver and unscrew the tightening screws of the plastic cover. With a plastic lever we peel off the lining placed in the lower right part of the dashboard, remove the cap from the filter holder, then extract the worn passenger compartment filter. We insert a new cabin filter, making it adhere well around the walls of the box. We mount the filter box cap and tighten the screws. We check the correct assembly of the parts mounted on the Mercedes C.


Posted on 8 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the cabin air filter of the 2013 Mercedes C220 CDI coupe located? Read Answer
    • Classe C 2007-2013 - How much does the Mercedes C-Class 220 cabin air filter cost? Read Answer
    • Classe C 2007-2013 - Where is the air conditioning filter of the Mercedes CW 204 class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos