Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Mercedes C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Air filter

See other generations:
Video tutorial

To replace the engine air filter on a Mercedes C-Class, turn off the engine and open the hood. Locate the air filter box, connected to the intake duct; the position and shape vary slightly depending on the engine type.

Remove any ducts that obstruct access, then release the clips or unscrew the screws holding the airbox cover. Lift the top and pull out the old filter element from its housing.

Clean the inside of the box, removing dust, leaves, and other debris, being careful not to let them enter the intake. Insert the new filter in the same position, ensuring that the edge fits properly along the entire housing.

Close the box, tighten the fasteners, and reattach any ducts previously disconnected, checking that each connection is securely in place.


Posted on 8 September 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter of the Mercedes C-Class W204
How to replace the engine air filter of the Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) .. replace the engine air filter of your Mercedes C-Class W204 independently and without the need for professional help, you must carefully read the following.. …
How to Replace the Cabin Air Filter on a Mercedes C-Class
How to Replace the Cabin Air Filter on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. replace the cabin air filter in the Mercedes C-Class? Follow these steps: Remove the plastic cover under the dashboard (right side), open the cap located.. …
How to Change the Rear Wiper Blade on a Mercedes C-Class
How to Change the Rear Wiper Blade on a Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. to change the rear wiper blade on a Mercedes C-Class: first, you need to remove the plastic cover that protects the rear wiper mechanism. Then, using.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos