Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the front headlamp bulb on the Mercedes Actros

Model: Mercedes Mercedes Various
Part: Air filter

Video tutorial

Let's see how to replace the dipped beam bulb of the front headlamp on the Mercedes Actros. Position yourself in front of the headlamp and use a screwdriver to unscrew the screw that secures the bezel, allowing access to the four screws that hold the headlamp unit, which we will unscrew using the same tool.

Rotate the headlamp outward to access the rear where you will release a metal clip to open the cover protecting the bulb. Disconnect the electrical connection, unclip the spring holding the bulb and remove it. Fit the new bulb, taking care not to touch the glass with bare fingers, and reassemble the parts by reversing the operations.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

Front Headlamp Bulb Replacement on Mercedes Actros MP4
Front Headlamp Bulb Replacement on Mercedes Actros MP4
Mercedes Mercedes Various In this video, you will see how to remove and replace the front headlamp bulb on a Mercedes Actros MP4. First, open the access panel near the headlam…
Replacing the Headlight Bulbs on a Mercedes Benz Actros
Replacing the Headlight Bulbs on a Mercedes Benz Actros
Mercedes Mercedes Various Today we will see the step-by-step instructions for removing and replacing the headlight bulbs on a Mercedes Benz Actros. First, move to the front an…
How to Replace the Front Headlamp Bulb on a Mercedes C300
Mercedes Mercedes Various In this guide for your Mercedes C300, discover the necessary steps to quickly and safely replace the front headlamp bulb. First, completely switch of…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos