Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Headlamp Bulb Replacement on Mercedes Actros MP4

Model: Mercedes Mercedes Various
Part: Headlight bulb

Video tutorial

In this video, you will see how to remove and replace the front headlamp bulb on a Mercedes Actros MP4. First, open the access panel near the headlamp and unscrew the Torx screw located underneath; then remove the piece and unscrew the headlamp screws, which are located on the side and at the bottom, as shown in the video.

At this point, extract the front headlamp by removing the cover of the dipped beam bulb; then disconnect the electrical connector and release the tab to remove it and replace it with a new H7 bulb.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Replacing the front headlamp bulb on the Mercedes Actros
Replacing the front headlamp bulb on the Mercedes Actros
Mercedes Mercedes Various Let's see how to replace the dipped beam bulb of the front headlamp on the Mercedes Actros. Position yourself in front of the headlamp and use a scre…
Replacing the Headlight Bulbs on a Mercedes Benz Actros
Replacing the Headlight Bulbs on a Mercedes Benz Actros
Mercedes Mercedes Various Today we will see the step-by-step instructions for removing and replacing the headlight bulbs on a Mercedes Benz Actros. First, move to the front an…
How to Tilt the Cab of a Mercedes Actros
How to Tilt the Cab of a Mercedes Actros
Mercedes Mercedes Various This video shows you the procedure for tilting the cab in a Mercedes Actros, a procedure that can be useful on various occasions. The control panel f…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos