Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seats from a Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Seat

In this video, you will learn how to quickly remove the rear seats from a Mercedes Vito: simply enter the vehicle from the back and fold the seat forward so that the lower mechanism is easily accessible. Release the three levers that secure each seat to the floor and lift the seat upwards to disengage it from its lock. With assistance, as this is a heavy item, you can remove the seats. To reinstall them, insert the hooks into the lock and slide them back into place. Then, close the levers, and you're done.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling and reassembling seats in a Mercedes Vito
Dismantling and reassembling seats in a Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) Let’s see how to quickly dismantle and reassemble the seats in a Mercedes Vito bus: loosen the bolt present on the floor to detach the folding seat f…
How to Remove the Rear Seat from a Mercedes Vito
How to Remove the Rear Seat from a Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) The Mercedes Vito is certainly the quintessential minibus: among the 9 seats, it is undoubtedly the vehicle that offers the most comfort and luxury, …
How to Remove the Front Seats of the Mercedes Vito
How to Remove the Front Seats of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) The instructions below outline the procedure for removing the front seats of the Mercedes Vito in simple and quick steps. First, open the front door …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos