Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Mercedes C-Class

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Service warning light

See other generations:
Video tutorial

Today's video will show you the steps to reset the service light for the routine maintenance oil change on the Mercedes C-Class. First, get in the vehicle and turn on the ignition; then press and hold the button located on the left side of the dashboard for a few seconds, as shown in the video.

At this point, repeat the operation until the service kilometers and maintenance key displayed are completely reset, following the video tutorial to the end!


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Reset the Service Light on the Mercedes-Benz C-Class
Reset the Service Light on the Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. maintenance oil change on the Mercedes-Benz C-Class. First, get in the vehicle and turn on the ignition; then access the onboard computer menu using.. …
Reset the Service and Maintenance Light on the Mercedes C-Class
Reset the Service and Maintenance Light on the Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. service and maintenance light on the Mercedes C-Class. First, get inside the cabin and turn on the instrument cluster. Use the steering wheel controls.. …
Reset the Service Light on the Mercedes-Benz C-Class
Reset the Service Light on the Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. maintenance oil change on the Mercedes-Benz C-Class. First, get in the vehicle and turn on the ignition; then press and hold the two indicated buttons.. …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos