Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on the Mercedes-Benz C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

Today's useful information will show you how to reset the service light for the routine maintenance oil change on the Mercedes-Benz C-Class. First, get in the vehicle and turn on the ignition; then press and hold the two indicated buttons for a few seconds to enter the onboard computer menu, as shown in the video.

At this point, navigate to the Assyst Plus option and then to Full Service, confirming and executing the reset of the maintenance key and service light!


Updated on 29 October 2026 by ScegliAuto


Related tutorials

Reset the Maintenance Light on the Mercedes C-Class
Reset the Maintenance Light on the Mercedes C-Class
Mercedes Classe C (2021-2026 / W206) .. the maintenance service light on the Mercedes C-Class. First, get in the vehicle and turn on the ignition. Then, go to the Assyst Plus option after entering.. …
Reset the Service Light on the Mercedes-Benz C-Class
Reset the Service Light on the Mercedes-Benz C-Class
Mercedes Classe C (2021-2026 / W206) .. regular oil change maintenance on the Mercedes-Benz C-Class, as well as the S-Class. First, get in the vehicle and turn on the instrument cluster; then.. …
How to Reset the Service Light on the Mercedes-Benz C-Class W205
How to Reset the Service Light on the Mercedes-Benz C-Class W205
Mercedes Classe C (2014-2021 / W205) .. reset the service light on your Mercedes-Benz C-Class W205 is practically identical to that used in all recent Mercedes models. Below are the.. …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos