Do it yourself
| ||||
|
Mercedes CLA - Video tutorial
Model: Mercedes CLA
X117, C117
- Years 2013-2019 To reset the service of the Mercedes Cla, we turn on the instrument panel, start the car engine and notice the message indicating the service to be performed; then, we turn the key to the first position, without turning on the instrument panel, we press the button with the phone handset on the left side of the steering wheel and simultaneously the "ok" button on the right side of the steering wheel; we scroll down with the arrow to the "assyst plus" written, press the "ok" button, scroll down with the arrow to the "full service" written, press the "ok" button, scroll down with the arrow to the "conf. Full Serv. " written, press the "ok" button, scroll to the oil grade indication, press the "ok" button, go to the "confirm" written, press the "ok" button and the service has been reset. Finally, we can check by starting the car engine and noticing that there are no messages regarding the service.
Posted on 10 May 2024 by ScegliAuto
How to reset the service light in the Mercedes CLA?
Mercedes CLA (2019-2024 / C118, X118) As we can see in this tutorial, resetting the service in the Mercedes CLA is an extremely simple and fast operation. Before proceeding, make sure tha
Reset of the ordinary maintenance light of the Mercedes CLA
Mercedes CLA (2019-2024 / C118, X118) After performing the routine maintenance service, it will be necessary to reset the service light for the routine maintenance of the engine oil chang
How to reset the tire pressure on a Mercedes CLA.
Mercedes CLA (2019-2024 / C118, X118) Thanks to today's very short video guide, we can see all the necessary steps to reset the tire pressure warning light on a 2019 Mercedes CLA model. L Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |