Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open and close the MG5 door mirrors

Model: MG 5 Ap12 - Years 2012-2018
Part: Side mirror

The guide shows how to fold the door mirrors of the Mg5. The car does not have an automatic or electric folding system for the mirrors, therefore it is necessary to fold them manually. Grasp the mirror body and lever towards the rear of the vehicle until it reaches the stop. Repeat the procedure also on the other side if necessary. To open, simply push the mirror body into the open position until you hear the stable position engagement sound. When opening, be careful not to apply too much force or the mirror will come out of its normal service position and open towards the front of the vehicle; in this case it will be sufficient to bring it back to the correct position.

Posted on 28 July 2022 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the MG MG5 EV?
What is the fuse diagram for the MG MG5 EV?
MG 5 (2020-2026 / MK 2) If some devices of our MG MG5 EV have suddenly stopped working, we can first of all check the status of the related fuses, whose diagrams are indicat…
How to install the fog light frames and rubber mat in the trunk of the Mg5?
How to install the fog light frames and rubber mat in the trunk of the Mg5?
MG 5 (2012-2018 / Ap12) The video above shows how easily you can enhance the aesthetics of the car and protect it from wear and dirt. In the first part, we focus on the rear…
How to mount non-slip pedals on our MG5
How to mount non-slip pedals on our MG5
MG 5 (2012-2018 / Ap12) The MG5 is a newly developed electric car, demonstrating that Chinese brands are not just mere imitations of Western models, but that there is an aut…

How to Remove the Centre Console on a Renault Kangoo

To remove the centre console on a Renault Kangoo, use a plastic lever to pry off the trim located at the bottom of the centre console. Remove the leather gaiter from the gear lever. After removing the gaiter, unscrew the securing screw located at the rear of the centre console (if present). Once this is done, pull the console away and disconnect any power cables. Finally, insert the new part into the centre console space and reassemble all components as they were removed.

Watch the video!


by ScegliAuto

More videos