Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Maintenance Service on a Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Service warning light

In this video, learn how to reset the oil maintenance service on a Fiat 500X. This is a very simple operation. Enter the vehicle and turn on the instrument cluster using the button next to the steering wheel. Press the accelerator pedal three times in quick succession, then release the pedal. Turn off the instrument cluster, then turn it back on and wait for it to illuminate. Finally, check the changes made to the car. Always remember to make adjustments to the onboard computer with the engine off.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) .. How to reset the oil maintenance service on a Fiat 500X? This is a very simple operation; enter the vehicle,.. …
Fiat 500 (2014-2022 / 500 X) In this tutorial, you will see how to reset the service light on the Fiat 500X, a very simple and quick operation to be performed only after completi…
Fiat 500 (2014-2022 / 500 X) How do you replace the engine oil on a Fiat 500X? Follow this guide to proceed with the replacement: open the car door and pull up the engine bay rel…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos