Do it yourself
Frequently asked questions about cars and motorcycles

Operation of the Headlight Switch on the Mini R56

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you will see how the headlight switch on the Mini R56 operates: you need to use the dial at the end of the indicator stalk. When the arrow points to the empty circle, the headlights are off; if you raise it one position, you reach the sidelights.

Moving up another notch activates the dipped headlights. If the vehicle is equipped with automatic headlights, these can be set under the empty dot: this way, the vehicle will do everything by itself.

To activate the main beam, push the lever forward from the dipped or automatic position. In this case, a very visible blue light will illuminate on the instrument panel; to turn it off, simply pull it back towards you.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

Mini (2007-2014 / R57, R56, R55) In this tutorial, you will see how to replace the headlight bulbs in the Mini Cooper R56, a very simple and quick operation. First, open the bonnet a…
Mini (2007-2014 / R57, R56, R55) You can confidently say that performing this task is quite simple and can be done by anyone; there is no need to go to a garage. The replacement of t…
Mini (2007-2014 / R57, R56, R55) If the cabin air filter in your Mini Cooper R56 (2007-2014) is worn out or you haven't replaced it for a long time and want to know how to carry out …

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos