Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the external handle of the Mini Cooper?

Model: Mini Mini F55, F54, F57, F56 - Years 2014-2023
Part: Handle

To replace the external handle of the Mini Cooper, you will need to open the corresponding door in order to locate the screw on the side of the door, near the handle. Once this screw has been loosened, you will be able to completely detach one end of the handle so that it can be removed from its housing. Once the old handle has been removed, you can insert the new one, securing it back into place with the screw located on the side of the door.

Posted on 18 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the external door handle of the Mini Cooper.
How to remove the external door handle of the Mini Cooper.
Mini (2007-2014 / R57, R55, R56) In this short and simple guide, we will see the steps that will allow us to disassemble and replace the external handle of the front door of the Mini…
Removing the Mini Cooper external handle
Removing the Mini Cooper external handle
Mini (2014-2023 / F55, F54, F57, F56) In this video tutorial we will see how to remove the external door handle of a Mini Cooper. First we open the front door and remove the rubber plug t…
How to disassemble the external rearview mirror of the Mini Cooper
How to disassemble the external rearview mirror of the Mini Cooper
Mini (2007-2014 / R57, R55, R56) If you want to dismantle one of the external rear-view mirrors on your Mini Cooper by yourself, then you must carefully read the following guide and …

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos