Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Timing Belt/Chain on a Mini

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

In this video, learn how to remove and replace the timing belt on a Mini (chain). Lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner).

Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Using a socket, unscrew the fastening pin of the tensioner pulley, and remove the water pump as shown in the video.

Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket. Finally, refit the rivets with the associated wheel arch liner and reattach the wheel with the tyre to the vehicle.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

When to Change the Timing Chain on the Mini Countryman
When to Change the Timing Chain on the Mini Countryman
Mini (2010-2016 / R60, Countryman1) As previously explained for the belt, the timing chain also synchronises the rotation of the crankshaft with the movement of the valves. Some vehicle…
Guide to replacing the timing chain on the Mini Cooper
Guide to replacing the timing chain on the Mini Cooper
Mini (2001-2007 / R53, R50, R52) Today’s guide will show you how and when to replace the timing chain on the Mini Cooper, following the instructions below. For this type of engine, t…
Replacing the timing chain on a Mini Cooper
Replacing the timing chain on a Mini Cooper
Mini (2007-2014 / R57, R56, R55) Today's guide will show you the main steps on how to dismantle and replace the timing chain on a Mini Cooper, in this case with the engine removed. T…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos