Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Mini Cooper S?

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Service warning light

From the Mini Cooper S instrument cluster, you can completely turn off the Service light by switching on the vehicle's ignition, allowing you to navigate through the menu on the display. At this point, press and hold both buttons located on the side of the speedometer until the warning light reappears with the maintenance interval that has been reset. You can then verify that the Service light has disappeared from the instrument cluster and that the car's maintenance interval has been reset to maximum.

Posted on 30 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a Mini Cooper
How to reset the service light on a Mini Cooper
Mini (2014-2023 / F55, F56, F57, F54) The service light reset on a Mini Cooper vehicle follows simple and quick steps to be carried out independently. To reset the service light related t…
How do you reset the Service light on the Mini Cooper?
How do you reset the Service light on the Mini Cooper?
Mini (2023-2026 / F66) To reset the Service light on the Mini Cooper, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slo…
How to reset the service light on the Mini Cooper
How to reset the service light on the Mini Cooper
Mini (2007-2014 / R55, R57, R56) In a few simple steps, we will reset the maintenance light for the engine oil change of the Mini Cooper. First, get into the car and turn on the dash…

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos