Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the brake pad light on a Mini

Model: Mini Mini R57, R55, R56 - Years 2007-2014
Part: Warning light – error code

Before we can begin, we will have to go and sit in the driver's seat of our Mini. So let's start by going to start the car. After that, we will have to go and press the "BC" button repeatedly, until we have reached the time screen. Once this is done, we will have to press and hold the "BC" button and the "0.0" button on the right side of the instrument panel, until the maintenance screen appears. We then proceed by selecting the tire warning light, and then holding down the "BC" button until the warning light switches off, and we have finished the reset.

Posted on 9 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Pad Service Light of the Mini Clubman
How to Reset the Brake Pad Service Light of the Mini Clubman
Mini (2007-2014 / R57, R55, R56) Today, we will see the instructions to reset the brake pad service light of the Mini Clubman. First, get inside the vehicle and turn on the instrumen…
How to reset the brake pad wear indicator light on the Mini Cooper.
How to reset the brake pad wear indicator light on the Mini Cooper.
Mini (2007-2014 / R57, R55, R56) Today we will see the steps that will allow us to reset the brake pad warning light on the Mini Cooper. First of all, we get on board the car and tur…
Resetting the brake pad warning on the Mini Countryman.
Resetting the brake pad warning on the Mini Countryman.
Mini (2017-2023 / Countryman2, F60) This short guide will show us how to reset the brake pad warning on the Mini Countryman, following the instructions below. First, we get into the car…

How to Replace the Engine Air Filter on BMW 3 Series

How to replace the engine air filter on BMW 3 Series? Let's see how to proceed in this video: open the car door, pull up the engine hood release lever located at the bottom left of the dashboard, and lift the front hood, securing it. Using a screwdriver, remove the air box assembly (where the air filter is located), disconnect the engine air intake hose and the metal clamp pin. Remove the air filter box from the vehicle body, then extract the worn air filter and insert a new one, ensuring it fits snugly around the walls of the box. Finally, reassemble the air box panel and tighten the screws. Close the front hood when finished.

Watch the video!


by ScegliAuto

More videos