|
Do it yourself
| |||
| ||||
How to reset Mini Countryman tire warning light
Model: Mini Mini
R57, R55, R56
- Years 2007-2014
If we realize that the low tire pressure warning light has come on on our car, we must first of all check the actual inflation pressure of the latter and, if necessary, restore the pressure recommended by the manufacturer. After that it will be necessary to go and reset the warning light that came on on the instrument panel and in the description below we will find the indications and methods to follow. After having accessed the passenger compartment, with the ignition on, press the BC button several times located at the end of the left-hand multifunction stalk until the reset indication is displayed. Then press and hold the BC button again until the low pressure light goes off.
Posted on 29 March 2023 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2010-2016 /
R60, Countryman1)
In the event of a puncture or loss of pressure in one or more tires, with subsequent restoration, the warning light must be reset manually in the Min…
Mini
(2010-2016 /
R60, Countryman1)
In order to reset the tire pressure warning light on the Mini Countryman, you need to inflate all the tires that are at an insufficient inflation pre…
Mini
(2010-2016 /
R60, Countryman1)
After restoring the correct pressure of one or more tires, for example in the event of a puncture, the relative warning light must be manually reset …
Other guides you may be interested in |
Removing the Timing Belt on a Suzuki Vitara
In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
