Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on the Mini Cooper S

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

To replace the serpentine belt on the Mini Cooper S (R56 model), first lift the vehicle with a jack or axle stands on the passenger side, then remove the wheel, the wheel arch liner, the front lights, and the cross panel. Also disconnect the two water reservoirs, both the windscreen washer and the radiator, and remove the hose leading to the turbo.

Now locate and remove the tensioner, which is secured with three screws. The belt is now free and can be extracted.

Complete the procedure by installing the new belt.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

Replacing the timing chain on a Mini Cooper
Replacing the timing chain on a Mini Cooper
Mini (2007-2014 / R57, R56, R55) Today's guide will show you the main steps on how to dismantle and replace the timing chain on a Mini Cooper, in this case with the engine removed. T…
How do you replace the drive belt in the Mini Cooper S R53?
How do you replace the drive belt in the Mini Cooper S R53?
Mini (2001-2007 / R53, R50, R52) The service belt refers, regardless of the car model, to the belt that allows the alternator, water pump, and air conditioner to function. In the Min…
How to Change the Auxiliary Belt on a Mini R56?
How to Change the Auxiliary Belt on a Mini R56?
Mini (2007-2014 / R57, R56, R55) Like the timing belt, the auxiliary belt plays a crucial role in the vehicle, as without it, you cannot recharge the car's battery, nor can you use t…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos