Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Auxiliary Belt on a Mini R56?

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

Like the timing belt, the auxiliary belt plays a crucial role in the vehicle, as without it, you cannot recharge the car's battery, nor can you use the air conditioning and the water pump, which is responsible for cooling the engine. To install the belt, remove the front right wheel and the wheel arch liner to gain access to the engine.

Then, remove the old belt and install the new one, routing it around the pulleys of the alternator, water pump, and the aforementioned air conditioning system.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to Replace the Serpentine Belt on the Mini Cooper S
How to Replace the Serpentine Belt on the Mini Cooper S
Mini (2007-2014 / R57, R56, R55) To replace the serpentine belt on the Mini Cooper S (R56 model), first lift the vehicle with a jack or axle stands on the passenger side, then remove…
Where is the Auxiliary Belt on a Mini Cooper?
Where is the Auxiliary Belt on a Mini Cooper?
Mini (2007-2014 / R57, R56, R55) Firstly, the auxiliary belt is not the timing belt and is generally replaced around 62,000 to 75,000 miles. You should assess the wear of its compone…
How to Replace the Timing Belt on the Mini Cooper
How to Replace the Timing Belt on the Mini Cooper
Mini (2007-2014 / R57, R56, R55) Replacing the timing belt on the Mini Cooper model R56 is a bit complex to perform independently. Start by opening the front bonnet and removing the …

Other guides you may be interested in

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos