Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on the Mitsubishi Colt?

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Shocks

To replace the rear shock absorber on the Mitsubishi Colt, loosen the bolts securing the corresponding wheel while keeping the car stable with a jack. Once the wheel is removed, unscrew the bolts securing the shock absorber at the bottom, near the driveshaft. After this bolt is removed, unscrew the one at the top, which can be accessed by opening the boot and removing the plastic panel in the boot area. Once this bolt is also loosened, remove the old shock absorber and replace it with a new one.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the 2009 Mitsubishi Colt?
Where is the fuse box located in the 2009 Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) Knowing the exact location of the fuse box in your 2009 Mitsubishi Colt is very important as it allows you to address various fuses in a targeted, sa…
How to Replace the Front Headlight Bulb on the Mitsubishi Colt
How to Replace the Front Headlight Bulb on the Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this mini guide for Mitsubishi Colt owners, learn the steps to correctly replace the front headlight bulb. First, park the car on a flat surface a…
How to Replace the Front Brake Pads on a Mitsubishi Colt
How to Replace the Front Brake Pads on a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Discover in this guide the instructions to remove and replace the front brake pads on a Mitsubishi Colt. First, lift the vehicle and remove the front…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos