Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Eclipse Cross
    4. : How to reset the maintenance light on a Mitsubishi Eclipse Cross.

Mitsubishi Eclipse Cross - Video tutorial

Model: Mitsubishi Eclipse Cross GK, GL, YA - Years 2018-2024
Operation: How to reset the maintenance light on a Mitsubishi Eclipse Cross.

In this short video, we are shown the steps to perform the procedure for resetting the maintenance light on a Mitsubishi Eclipse Cross. The operation is really very simple and of short duration; first, we will have to get into the car and turn on the vehicle's instrument panel without starting the engine. At this point, we will see the maintenance light on the display, indicated by the icon of an English key. To make it disappear, we will have to use the buttons on the left side of the steering wheel: the first button to press will be the one on the far right; pressing it several times, we select the trip A option. At this point, we press the center button and hold it down until the service light starts flashing; we release the button and the word "clear" will appear, indicating that the operation has been completed.


Posted on 2 June 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos