Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Moto Guzzi Griso
Part: Clutch

To replace the clutch on a Moto Guzzi Griso, you need to completely extract the engine from its housing under the seat. To fully remove the engine, loosen the bolts securing the front wheel to facilitate access. Then, by unscrewing the additional bolts that secure the engine mounts, you can remove the engine and disassemble the clutch located at the front: this way, you can install the new clutch, cover it with the casing, and reinstall all removed parts.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Moto Guzzi Griso 1200
How to Replace the Clutch on a Moto Guzzi Griso 1200
Griso This guide explains the procedure to remove and replace the clutch discs on a Moto Guzzi Griso 1200. To replace the clutch, you need to remove the en…
How do you replace the clutch of the Moto Guzzi Griso?
How do you replace the clutch of the Moto Guzzi Griso?
Griso The procedure for replacing the clutch on the Moto Guzzi Griso involves completely removing the engine block from its housing space under the seat. I…
How do you replace the clutch of the Moto Guzzi Griso?
How do you replace the clutch of the Moto Guzzi Griso?
Griso The operation of removing the clutch on the Moto Guzzi Griso can be carried out by completely extracting the engine from its housing located under th…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos