Do it yourself
Frequently asked questions about cars and motorcycles

Model: Moto Guzzi Griso
Part: Clutch

The procedure for replacing the clutch on the Moto Guzzi Griso involves completely removing the engine block from its housing space under the seat. In order to fully remove the engine, the bolts securing the front wheel must be loosened to remove it for easier access. Therefore, by loosening the additional bolts securing the engine mounts, it will be possible to remove the engine and disassemble the clutch located at the front. In this way, the new clutch can be installed, covered with the casing, and all other components can be reinstalled.

Posted on 16 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Griso To replace the clutch on a Moto Guzzi Griso, you need to completely extract the engine from its housing under the seat. To fully remove the engine, l…
Griso This guide explains the procedure to remove and replace the clutch discs on a Moto Guzzi Griso 1200. To replace the clutch, you need to remove the en…
Griso The operation of removing the clutch on the Moto Guzzi Griso can be carried out by completely extracting the engine from its housing located under th…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos