Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. : Side indicator light

Side Indicator Light - Do-it-yourself video
guides

Piaggio Vespa Gts 125
How to replace the front turn signal bulbs on the Piaggio Vespa GTS?

In this tutorial, we can see how to replace the front turn signal bulbs on the Piaggio Vespa GTS, a very simple and quick operation. To do this, we will need a …read all…
Posted on 14 July 2023 by ScegliAuto
Suzuki Burgman 400
How to replace turn signal bulbs on the Suzuki Burgman 400 scooter?

In this tutorial, we can see how to replace the front turn signal bulbs on the Suzuki Burgman 400 scooter, an extremely simple and fast operation. First of …read all…
Posted on 12 June 2023 by ScegliAuto
Harley Davidson Road King
Replacement of the front arrow on Harley Davidson Road King

Bye! Today we show you how to replace a side turn signal bulb on Harley Davidson Road King. Get a Phillips screwdriver and unscrew the two screws that secure …read all…
Posted on 18 February 2024 by ScegliAuto
Harley Davidson Street Rod
Replacement of the side indicator light on Harley Davidson Street Rod

Replacing the front indicator lights on Harley Davidson Street Rod is really child's play, a job for which you absolutely do not need to go to the workshop but …read all…
Posted on 3 February 2024 by ScegliAuto
Triumph Street Triple 675r
Replacement of the side indicator light on Triumph Street Triple

Before replacing the front indicator bulb of your Triumph Street Triple it is recommended to disconnect the battery poles for safety reasons (disconnect the …read all…
Posted on 1 February 2024 by ScegliAuto
Yamaha R15 V3
Replacement rear indicators on Yamaha R15

Today we will show you how to get to the side and rear turn signals on Yamaha R15 V3. Remove the main seat, then unscrew the bolt securing the rear seat and …read all…
Posted on 30 January 2024 by ScegliAuto
Benelli Imperiale 400
Replacing the front indicator bulb on Benelli Imperiale 400

Replacing the front indicator bulbs on Benelli Imperiale consists of a very simple maintenance, very fast and really within everyone's reach, even for novice …read all…
Posted on 29 January 2024 by ScegliAuto
Triumph Street Triple 765r
Replacement of the side indicator light on Triumph Street Triple 765r

Unscrew the screw that holds the indicator light in place with an Allen wrench. At this point, extract the fairing on which the taillight is mounted by …read all…
Posted on 27 January 2024 by ScegliAuto
Kymco Agility 125
Replacing the indicator bulbs on Kymco Agility 125

Unscrew the screw located behind the small casing containing the arrow. This will be enough to remove the orange cover and access the bulb. At this point you …read all…
Posted on 4 January 2024 by ScegliAuto
Benelli Trk 502
Disassembly of Benelli TRK 502 indicators

Today we will see how to disassemble the side arrows of a Benelli TRK 502. First we are going to unscrew the rear fixing screws, using a 14 mm wrench; after …read all…
Posted on 3 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos