Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Imperiale 400
    4. : Replacing the front indicator bulb on Benelli Imperiale 400

Model: Benelli Imperiale 400
Part: Side indicator light
Replacing the front indicator bulb on Benelli Imperiale 400

Replacing the front indicator bulbs on Benelli Imperiale consists of a very simple maintenance, very fast and really within everyone's reach, even for novice maintenance technicians. And now we will prove it to you! For this maintenance you just need to get a small Phillips screwdriver and unscrew the two small screws placed vertically on the light. Once the headlight has been uncovered, you can unscrew the small bulb by hand and screw in the equivalent one you have purchased. Reassemble the taillight by tightening the two small screws and that's it. Check the correct functioning of the light bulb.


Posted on 29 January 2024 by ScegliAuto



How to replace the headlight bulb in Benelli Imperiale 400?
Imperiale 400 In this tutorial we can see how to replace the headlight bulb in the Benelli Imperiale 400, an extremely simple and fast operation. First of all, mak
How to replace the headlight bulb in Benelli Imperiale 400?
Imperiale 400 In this tutorial we can see how to replace the headlight bulb in the Benelli Imperial 400, an extremely simple and fast operation. First of all, make
How to remove the front wheel of the Benelli Imperiale 400
Imperiale 400 Let's see in this short guide how to remove the front wheel and possibly also the tire of the Benelli Imperiale 400 motorcycle. First of all we put o

How to replace the motor oil in the Ducati Monster 620?

Replacing the motor oil in the Ducati Monster 620, as we can see in this tutorial, is an extremely simple and quick operation. First of all, we wait for the engine to cool down sufficiently, so that we can work safely, then we position a container under the motorcycle, locate the drain hole bolt and unscrew it with a 10mm hex key. We then let all the oil in the system drain out, unscrew the old filter and tighten the replacement. At this point, all that's left to do is put everything back together and pour the necessary amount of oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos