Do it yourself
Frequently asked questions about cars and motorcycles
To replace the rear shock absorber of the Benelli Imperiale 400, you need to loosen the screws that secure the component to its housing: these screws will be located at the bottom and the top of the shock absorber itself, corresponding to the rear swingarm and the fender. Once the old shock absorber has been removed, you can position the new one so that it is secured with the corresponding screws; after the replacement, you will need to perform the same operation on the other side to ensure that everything functions properly.

Posted on 12 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Imperiale 400 To replace the rear shock absorber of the Benelli Imperiale 400, you will need to loosen the screws that secure the component to its housing: this wi…
Imperiale 400 In this tutorial, see how to replace the rear brake pads on the Benelli Imperiale 400, a very simple and quick operation. First, position yourself in…
Imperiale 400 To replace the rear brake pads on a Benelli Imperiale 400, loosen the bolts that secure the brake caliper to the brake disc. Once the bolts are loose…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos