Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, you will learn how to access the side and rear indicator lights on a Yamaha R15 V3. Remove the main seat, then undo the bolt securing the rear seat and take it off. Disconnect the connectors and pass them under the brackets, as shown in the video (this operation requires a lot of patience as space is very limited). Unscrew the underlying bolts that are now accessible (this is why the connectors needed to be moved), and then the four bolts securing the side rear fairings to the bike. At this point, you can easily access the rear indicators and replace them.

Updated on 12 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the front brake pads of the Yamaha R15?
How do you replace the front brake pads of the Yamaha R15?
R15 V3 In order to replace the front brake pads of the Yamaha R15, you need to loosen the screws that secure the caliper to its housing on the front brake d…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos