Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Mvagusta F3 675
Part: Battery

In order to replace the battery of the MV Agusta F3 675, you will need to loosen the screws that secure the panel located on the left side of the bike, between the rear swingarm and the corresponding fender. Once the panel is removed, you can locate the battery, which needs to be removed by loosening the fixing screws and disconnecting the power cables. Once the device is freed, you can insert the new replacement piece to ensure that everything is functioning properly.

Posted on 24 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on the MV Agusta F3 675 - 800
How to Replace the Battery on the MV Agusta F3 675 - 800
F3 675 In today's tutorial, you will learn how to remove and replace the battery on the MV Agusta F3 675, as well as the 800. First, remove the two plastic …
How to Replace the Exhaust on a MV Agusta F3 675?
How to Replace the Exhaust on a MV Agusta F3 675?
F3 675 To replace the exhaust on a MV Agusta F3 675, you need to remove the side panels covering the exhaust. To remove these panels, loosen the fixing scre…
How do you replace the air filter of the MV Agusta F3 675?
How do you replace the air filter of the MV Agusta F3 675?
F3 675 In order to replace the air filter of the MV Agusta F3 675, you need to loosen the screws that hold the fuel tank in place, so that it can be complet…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos