Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove and replace the fairings on the MV Agusta F3 675

Model: Mvagusta F3 675
Part:

Video tutorial

In this video tutorial, you will learn how to remove and replace the side plastic fairings of the MV Agusta F3 675, as well as the 800 model. First, place your bike on a stand and begin unscrewing all the side screws found on the upper fairings, as well as on the lower ones and the engine cover; use a 4 mm hex key and a 2.5 mm hex key, as shown in the video.

Next, use a 14 mm socket wrench and a 5 mm hex key to completely remove the fairings, following the video tutorial to the end!


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Remove the Exhaust Gas Sensor on Mv Agusta F3 675 - 800
How to Remove the Exhaust Gas Sensor on Mv Agusta F3 675 - 800
F3 675 In today's tutorial, you will learn how to remove the exhaust gas sensor on the Mv Agusta F3 675, as well as the 800, by following the instructions b…
How to Replace the Battery on the MV Agusta F3 675 - 800
How to Replace the Battery on the MV Agusta F3 675 - 800
F3 675 In today's tutorial, you will learn how to remove and replace the battery on the MV Agusta F3 675, as well as the 800. First, remove the two plastic …
Guide to Change the Engine Oil on a MV Agusta F3 675
Guide to Change the Engine Oil on a MV Agusta F3 675
F3 675 In this brief guide, we will see how to change the engine oil while performing the regular maintenance service on the MV Agusta F3 675. First, remove…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos