Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the MV Agusta F3 675?

Model: Mvagusta F3 675
Part: Engine

Video tutorial

It will be possible to disassemble the engine of the MV Agusta F3 675 by loosening the screws that fix the block to its housing in the central lower part of the frame: once the support screws have been loosened, it will be necessary to proceed by unscrewing the screws that fix the intake manifold and the exhaust manifold.

Now it will be possible to unscrew the cylinder screws in order to remove it and have access to the respective piston: this can now be completely detached in order to access the crankshaft and all other internal components.

After replacing the necessary parts, it will be possible to close the block again and verify its operation.


Posted on 19 September 2025 by ScegliAuto


Related tutorials

Guide to Change the Engine Oil on a MV Agusta F3 675
Guide to Change the Engine Oil on a MV Agusta F3 675
F3 675 In this brief guide, we will see how to change the engine oil while performing the regular maintenance service on the MV Agusta F3 675. First, remove…
How to Remove the Exhaust Gas Sensor on Mv Agusta F3 675 - 800
How to Remove the Exhaust Gas Sensor on Mv Agusta F3 675 - 800
F3 675 In today's tutorial, you will learn how to remove the exhaust gas sensor on the Mv Agusta F3 675, as well as the 800, by following the instructions b…
How to Adjust the Chain on the MV Agusta F3 675
How to Adjust the Chain on the MV Agusta F3 675
F3 675 This guide will show you how to adjust the drive chain on the MV Agusta F3 675 motorcycle, as well as the F3 800. First, place the motorcycle on a st…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos