Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear turn signal bulb on the MV Agusta Turismo Veloce?

Model: Mvagusta Turismo Veloce
Part: Light bulb

Video tutorial

To replace the rear turn signal bulb on the MV Agusta Turismo Veloce, you need to loosen the screws that secure the rear turn signal support, which is located directly underneath the end of the fender. Once the screws securing the support have been loosened, you can proceed to remove the bulb from inside its housing and disconnect the corresponding connector.

Once the old bulb has been removed, you can insert the new one: the new bulb can now be connected and placed back into the housing, ensuring that everything works properly.


Posted on 4 January 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil of the MV Agusta Turismo Veloce 800?
How do you replace the motor oil of the MV Agusta Turismo Veloce 800?
Turismo Veloce It will be possible to replace the MV Agusta Turismo Veloce 800 by loosening the oil drain plug located in the central lower part of the vehicle: onc…
How do you replace the exhaust pipe of the MV Agusta Turismo Veloce?
How do you replace the exhaust pipe of the MV Agusta Turismo Veloce?
Turismo Veloce To replace the exhaust on the MV Agusta Turismo Veloce, you will need to loosen the screws that secure the exhaust terminal to its housing, near the …
How do you replace the exhaust of the MV Agusta Turismo Veloce?
How do you replace the exhaust of the MV Agusta Turismo Veloce?
Turismo Veloce The exhaust of the MV Agusta Turismo Veloce can be replaced by loosening the screws that secure it to its housing, located near the rear wheel on the…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos