Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, you will learn how to carry out routine maintenance by replacing the engine oil and oil filter of the MV Agusta Brutale 910. First, place the bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes. Then, unscrew the oil filter cartridge using the appropriate tool, carefully screwing on the new one. At this point, top up with new engine oil, pouring the correct amount and subsequently checking the level.

Posted on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Performing a Service on MV Agusta Brutale R910
Performing a Service on MV Agusta Brutale R910
Brutale R910 In this video, we’ll go through all the steps needed to perform a routine maintenance service on an MV Agusta Brutale R910 motorcycle. First, remove …
Instructions for Removing the Clutch from an MV Agusta Brutale 910 R
Instructions for Removing the Clutch from an MV Agusta Brutale 910 R
Brutale R910 In today's video, you will see the main instructions that will allow you to remove the clutch from an MV Agusta Brutale 910 R. First, drain the engin…
How to Replace the Grips on a MV Agusta Brutale 910?
How to Replace the Grips on a MV Agusta Brutale 910?
Brutale R910 To replace the grips on a MV Agusta Brutale 910, loosen the central nut that secures the corresponding weight at the end of the handlebars. Once the …

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos