Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlamp Bulb on MV Agusta Brutale

Model: Mvagusta Brutale 750
Part: Light bulb

Video tutorial

Descriptive guide for replacing the headlamp bulb on an MV Agusta Brutale. Obtain an H9 bulb.

Position the motorcycle on the side stand. Using a ratchet and a 6mm hex socket, remove the two side screws from the front headlamp.

Be careful of the two rubber washers under the screws. Extract the headlamp and disconnect the connector from the headlamp.

Place a clean cloth on a work surface, position the headlamp with the reflector facing down and locate the fixing screw. Using a cross-head screwdriver, unscrew the screw and open the headlamp.

Take care with the wiring and the sealing gasket. The H9 bulb is removed by turning it counterclockwise by 45 degrees.

Replace the halogen bulb and reassemble as per disassembly.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Replace the EPROM of the MV Agusta Brutale ECU
How to Replace the EPROM of the MV Agusta Brutale ECU
Brutale 750 To replace the EPROM of the MV Agusta Brutale ECU, first, remove the ECU by loosening the bolts that secure it to its housing and disconnecting the r…
How to Remove the Thermostat on an MV Agusta Brutale 750
How to Remove the Thermostat on an MV Agusta Brutale 750
Brutale 750 In this tutorial, you will learn how to remove and replace the coolant thermostat on the MV Agusta Brutale 750, as well as the Brutale 910. First, pl…
How to replace the clutch cylinder on the MV Agusta Brutale 750?
How to replace the clutch cylinder on the MV Agusta Brutale 750?
Brutale 750 To replace the clutch cylinder on the MV Agusta Brutale 750, loosen the screws that secure the cylinder to its housing on the right side of the bike.…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos