Do it yourself
| ||||
|
Model: Mvagusta F4 750
The radiator fluid drain bolt is the one near the pump, on the left side of the bike and obviously at the bottom. Unscrew it and collect the liquid in a container, but also unscrew the cap of the compartment from which you will eventually load the new liquid, in order to avoid vacuum in the circuit. Disconnect the circuit from the radiator (obviously more liquid will come out) and unscrew the screws and the fixing brackets that hold it in place. Also disconnect the associated connector. Remove the radiator working with care. Obviously proceed backwards for reassembly. Good job!
Posted on 18 January 2024 by ScegliAuto
|
How do you replace the air filter on the Harley Davidson Dyna?The procedure for replacing the air filter on the Harley Davidson Dyna involves loosening the screws that secure the cover located on the right side of the motorcycle, just below the fuel tank. Once the cover has been removed, the underlying filter can be located: it must be removed from its seat by loosening the fixing screws and pulling it out from inside its housing. After the old filter has been removed, the new replacement piece can be installed, securing it in place with the screws and reinstalling the removed cover. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |