Do it yourself
Frequently asked questions about cars and motorcycles

Model: Mvagusta F4 750
Part: Pump

To replace the water pump on the MV Agusta F4, loosen the bolts securing the fairing on the left side of the bike so that it can be removed. This will provide access to the underlying water pump, which must be freed from its housing by unscrewing the securing bolts and disconnecting the attached hose. Once the old pump is removed, insert the new one, securing it with its screws and reconnecting the hose. Finally, cover everything by reinstalling the fairing on the left side of the bike.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

F4 750 You can replace the exhaust on the MV Agusta Brutale F4 750 by unscrewing the screws that secure the exhaust terminal to its housing, located near th…
F4 750 In order to replace the exhaust system of the MV Agusta F4 750, you need to loosen the screws that hold the exhaust terminal to its housing, so that …
F4 750 To replace the coolant on the MV Agusta F4 750, open the drain plug located at the bottom of the radiator, just behind the front wheel. Allow all the…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos