Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the fuel filter on the MV Agusta Brutale 1078 RR, you must first completely remove the fuel tank located at the front of the motorcycle: this requires unscrewing the corresponding fixing screws and detaching the side panels. Once the connectors have been removed, you can access the bottom of the tank, where the pump is located: this must be extracted from its housing by unscrewing the fixing bolts. The fuel filter is located on the pump itself and can now be completely removed and replaced with a new one.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Air Intakes of the MV Agusta Brutale 1078 RR
How to Remove and Replace the Air Intakes of the MV Agusta Brutale 1078 RR
Brutale 1078 Rr Today, in this video tutorial, learn how to remove and replace the air intakes, which are the air ducts to the engine air filter, of the MV Agusta Br…
How to Replace the Battery Cables on a MV Agusta Brutale 1078 RR
How to Replace the Battery Cables on a MV Agusta Brutale 1078 RR
Brutale 1078 Rr To replace the battery cables on a MV Agusta Brutale 1078 RR, loosen the bolts securing the seat to its housing, also unscrewing those that secure th…
How to Replace the Throttle Grip on the MV Agusta Brutale 1078 RR
How to Replace the Throttle Grip on the MV Agusta Brutale 1078 RR
Brutale 1078 Rr To replace the throttle grip on the MV Agusta Brutale 1078 RR, disconnect all the cables connected to the base of the grip, which control the valves …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos