Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Fuel Pump on the MV Agusta Brutale 1078RR

Model: Mvagusta Brutale 1078 Rr
Part: Fuel pump

Video tutorial

In this video tutorial, we will guide you through the installation of the new fuel pump on the tank of the MV Agusta Brutale 1078RR. Before installing the new pump, you must remove the old one by placing the tank on a solid base; then unscrew the fixing screws and disconnect the fuel line.

At this point, install the new fuel pump, along with its original replacement; ensure that the gasket is correctly placed on the base of the pump, connecting the fuel hose.

Finally, refit the tank onto the motorcycle!


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Dismantle the Gearbox on the MV Agusta Brutale 1078RR?
How to Dismantle the Gearbox on the MV Agusta Brutale 1078RR?
Brutale 1078 Rr To dismantle the gearbox on the MV Agusta Brutale 1078RR, loosen the screws that secure it to its housing at the central lower part of the frame, jus…
How to Replace the Brake Pads on a MV Agusta Brutale 1078RR?
How to Replace the Brake Pads on a MV Agusta Brutale 1078RR?
Brutale 1078 Rr To replace the brake pads on a MV Agusta Brutale 1078RR, unscrew the bolts securing the brake caliper to the corresponding disc so that it can be com…
How to Adjust the Valves on a MV Agusta Brutale 1078RR
How to Adjust the Valves on a MV Agusta Brutale 1078RR
Brutale 1078 Rr To check the valves on the MV Agusta Brutale 1078RR, you need to completely remove the engine block from its housing so that you can detach the corre…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos