Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a MV Agusta Brutale 1078RR?

Model: Mvagusta Brutale 1078 Rr
Part: Brake pads

Video tutorial

To replace the brake pads on a MV Agusta Brutale 1078RR, unscrew the bolts securing the brake caliper to the corresponding disc so that it can be completely removed and disconnected from the relevant cables. Once the caliper is free, remove the pins that secure the pads inside the caliper, allowing the old pads to be slid out and replaced with new spare parts.

After the replacement, reassemble all the disassembled components, securing them with the appropriate screws and reconnecting them to the relevant cables.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Dismantle the Gearbox on the MV Agusta Brutale 1078RR?
How to Dismantle the Gearbox on the MV Agusta Brutale 1078RR?
Brutale 1078 Rr To dismantle the gearbox on the MV Agusta Brutale 1078RR, loosen the screws that secure it to its housing at the central lower part of the frame, jus…
How to Adjust the Valves on a MV Agusta Brutale 1078RR
How to Adjust the Valves on a MV Agusta Brutale 1078RR
Brutale 1078 Rr To check the valves on the MV Agusta Brutale 1078RR, you need to completely remove the engine block from its housing so that you can detach the corre…
How to Replace the Levers on a MV Agusta Brutale 1078RR?
How to Replace the Levers on a MV Agusta Brutale 1078RR?
Brutale 1078 Rr To replace the levers on a MV Agusta Brutale 1078RR, you need to loosen the nuts that secure the pins at the end of each lever: once these two nuts a…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos