Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Valves on a MV Agusta Brutale 1078RR

Model: Mvagusta Brutale 1078 Rr
Part: Valve

Video tutorial

To check the valves on the MV Agusta Brutale 1078RR, you need to completely remove the engine block from its housing so that you can detach the corresponding valve cover. Once the cover on the left side has been removed, you will be able to identify the underlying valves.

Each valve must be adjusted using a feeler gauge to ensure all valves are set correctly. After the adjustment is complete, replace the valve cover, ensuring everything functions correctly.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Install the Fuel Pump on the MV Agusta Brutale 1078RR
How to Install the Fuel Pump on the MV Agusta Brutale 1078RR
Brutale 1078 Rr In this video tutorial, we will guide you through the installation of the new fuel pump on the tank of the MV Agusta Brutale 1078RR. Before installin…
How to Dismantle the Gearbox on the MV Agusta Brutale 1078RR?
How to Dismantle the Gearbox on the MV Agusta Brutale 1078RR?
Brutale 1078 Rr To dismantle the gearbox on the MV Agusta Brutale 1078RR, loosen the screws that secure it to its housing at the central lower part of the frame, jus…
How to Replace the Brake Pads on a MV Agusta Brutale 1078RR?
How to Replace the Brake Pads on a MV Agusta Brutale 1078RR?
Brutale 1078 Rr To replace the brake pads on a MV Agusta Brutale 1078RR, unscrew the bolts securing the brake caliper to the corresponding disc so that it can be com…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos