Do it yourself
Frequently asked questions about cars and motorcycles
To change the engine oil of the MV Agusta F4 750, you need to unscrew the screws fixing the side and lower panels of the bike, particularly the one on the right side. Once the screws are removed and the panels taken off, you can locate the oil drain plug in the central lower area of the vehicle. By unscrewing the plug, you can collect all the used oil in a suitably positioned container. After the oil has drained out, you can top up the oil from the breather located on the right side of the engine casing.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

F4 750 To change the oil of the MV Agusta F4 750, you need to unscrew the drain plug located under the oil sump on the lower left side of the bike. Position…
F4 750 To remove the engine from the MV Agusta F4 750, loosen the screws securing the side fairings of the bike so they can be completely detached, providin…
F4 750 Before starting, lift the front end of your MV Agusta F4 750. Begin by unscrewing and removing the bolts that secure the two front brake calipers to …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos